कच्चे माल की आवश्यकताएं इस प्रकार हैं:
(1) मोलिब्डेनम भूनने के लिए एस की आवश्यकता होती है<0.10%, Cu<0.6%, and Pb<0.5%. The actual ingredients are: Mo48.5%~52%, S0.04%~0.07%, P0.01%~0.02%, Cu0.1%~0.5%, Pb0.2%~0.5%, FeO3%~5%, SiO28%~14%, CaO2%~4.5%. 5% to 10% of the total molybdenum is in the form of MoO2, which should be considered when calculating the reaction heat. The particle size is <15mm, of which >10 मिमी का हिस्सा 10% से कम है, और<2mm accounts for about 60%. (2) Ferrosilicon powder contains Si75%~77%; the particle size is <1mm.

फेरो मोलिब्डेनम पाउडर की कीमत
(3) Aluminum particles contain Al>90% और Cu<0.1%; the particle size is <3mm, and the part <0.5mm shall not exceed 30%.
(4) Iron ore contains Fe>65%, S<0.05%, P<0.05%, C<0.30%; particle size<1mm. Iron oxide scale or iron concentrate can be used instead.
(5) स्टील स्क्रैप साधारण कार्बन स्टील स्क्रैप हैं, और कर्ल की लंबाई है<50mm.
(6) Fluorite contains CaF2>90%. कण आकार<3mm.

फेरो मोलिब्डेनम मिश्र धातु की कीमत
(7) Saltpeter contains NaNO3>90%। सभी कच्चे माल को अच्छी तरह से सुखाया जाना चाहिए और गलाने की प्रक्रिया के दौरान छींटे और दुर्घटनाओं से बचने के लिए नमी नहीं होनी चाहिए। कच्चे माल को गणना किए गए अनुपात के अनुसार सटीक रूप से तौला जाता है, मिक्सर में डाला जाता है और समान रूप से मिलाया जाता है, फिर गलाने वाली भट्टी में डाला जाता है, और ऊपरी प्रज्वलन विधि का उपयोग करके गलाया जाता है।


